Team Foxtrot Uniform

GF93 · Post by **GF93** » Sun Apr 30, 2017 6:12 pm

Seriously wish I'd thought of this first, that's amazing.

NFX · Post by **NFX** » Sun Apr 30, 2017 7:22 pm

That's a hell of a lot of articulation there. Hopefully it all works as intended.

Sylandrophol · Post by **Sylandrophol** » Mon May 01, 2017 3:05 pm

Something a bit also familliar will be my HW for CBC2.

Here's the new Massimo, the shape is inspired by a Indian combat robot named Angar, even though Indian combat robots, and their safety standards are not the best, Angar definitely caught my attention.

Some other views of the new Massimo, showing it's odd chassis shape.

Sylandrophol · Post by **Sylandrophol** » Thu May 04, 2017 4:41 pm

Doublepost, but here's something completely different.

Meet Mutated Aberration, a 2WD, omni trackball drive, melty thwackbot!

Mutated Aberration features wedges on the front and back end of the bot, so if it stops spinning, it can ram and wedge aggressors.

For stats, here's this:

Speed: 16
Traction: 5
Torque: 1
Weapon: 0
Armor: 8

Cha0sFerret · Post by **Cha0sFerret** » Fri May 05, 2017 4:30 pm

You'll need at least 1 weapon for melty movement control (unless this was designed for CBC rules, in which case you could probably get away with dropping a little traction for extra armor). Otherwise it looks pretty decent.

Sylandrophol · Post by **Sylandrophol** » Sat May 06, 2017 8:26 am

New MW.

Here is Fight Or Flight, it's a dustpan clamp, somewhat akin to Complete Control, the white forks in the dustpan lift up, and the hammer bites down. It's quite simple, you see?

Backshot of Fight Or Flight, featuring the back wedges, for defense against spinners.

Post by **Archangel** » Sat May 06, 2017 3:42 pm

The gap in the rear wedges is unnecessary for hammer functionality and will just let spinners get a good bite on you

Like the lifter in dustpan design, it's like that antweight a guy made out of a krave cereal box

Sylandrophol · Post by **Sylandrophol** » Tue May 09, 2017 10:38 pm

First of all, have some good introduction music for this bot.

Here is Stealth Bomber, ready to take out spinners with not only one plow, but TWO plows! Both on it's front and back, and the front plow is a 360-degree lifter. Ready to kick ass and chew bubble gum, better run for the hills when you see this bot coming your way!

Speed: 7
Traction: 5
Torque: 4
Weapon: 3
Armor: 11

NFX · Post by **NFX** » Wed May 10, 2017 4:33 am

Very sleek design there, I like it. Although the sides of the rear plow will block the lifter arms as it rotates, so you might want to chop them if you want the lifter to go all the way around.

Sylandrophol · Post by **Sylandrophol** » Sat May 13, 2017 12:10 am

Redesigned Neophyte Redglare up a bit.

Features less black ABR hinged wedges in the front, but has angled wedges on the front and back. As always, back wedge is hinged.

BUT WAIT! There's more!

Neophyte Redglare now features a alternate back plow configuration, to fend off spinners.

[attackfrog on Tinkercad] · Post by **attackfrog** » Sat May 13, 2017 1:40 pm

I really like the color scheme and decorations on this robot. It's not always easy to do that with TinkerCAD.

Sylandrophol · Post by **Sylandrophol** » Sat May 13, 2017 2:46 pm

Do you like rammers? I like rammers! Big ol' rammers in fact!

Here is Outback Aussie, a SHW 8WD, vegemite-fueled, drunken rammer straight from the land down under! Expect to see this crazy kookaburra in CBC2 and R4.

Sylandrophol · Post by **Sylandrophol** » Mon May 15, 2017 9:16 pm

Okay, for real, CBC2 MW.

Twilight Zone, fast, pushy, rear-hinged flipper. Need i say more?

Wolf51-50 · Post by **Wolf51-50** » Mon May 15, 2017 10:26 pm

I'd make that flipper arm stick out a bit more. And those wheels are *sooo* close to being exposed in the back (which is a good thing. Exposed rear wheels = easy j hooking off of wedges) Looks like a good Matador clone though

Post by **Archangel** » Mon May 15, 2017 10:36 pm

See I don't think it needs to stick out any more :P