Team Stealth Productions: Vaporbots Division
-
- Posts: 296
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Parts Unknown
- Team: Team Stealth Productions
- Contact:
Team Stealth Productions: Vaporbots Division
Alright, I'm finally getting around to creating a submissions thread since I now have a growing list of completed designs (and CAD ideas for new ones).
And in the future, I can look back and laugh at my POS designs from before! :proud:
This is CopyofCopyofCopy V1.0, a Featherweight-yeah, horrible
This is Rushin' Roulette V1.0, a Lightweight-also garbage
This is my Tombclone, Death Metal. Shame I ruined its chances in CBC by messing up the stats. I WILL give it more speed for the next event that I enter it in! BTW, huge thanks to Badnik for the render! XD
This is XIII (Thirteen) V1.0, a Superheavyweight-looks like crap, but it's actually holding its own in the CBC tournament.
I also created Valravn, a Heavyweight, for the Reddit RP Room Pressure Drop tournament:
Last, but not least-my Hammerfall tournament entry: Nachtfalke
That's it, for now. This page will be updated as I create new (and improved) designs.
And in the future, I can look back and laugh at my POS designs from before! :proud:
This is CopyofCopyofCopy V1.0, a Featherweight-yeah, horrible
This is Rushin' Roulette V1.0, a Lightweight-also garbage
This is my Tombclone, Death Metal. Shame I ruined its chances in CBC by messing up the stats. I WILL give it more speed for the next event that I enter it in! BTW, huge thanks to Badnik for the render! XD
This is XIII (Thirteen) V1.0, a Superheavyweight-looks like crap, but it's actually holding its own in the CBC tournament.
I also created Valravn, a Heavyweight, for the Reddit RP Room Pressure Drop tournament:
Last, but not least-my Hammerfall tournament entry: Nachtfalke
That's it, for now. This page will be updated as I create new (and improved) designs.
Last edited by Shaba117 on Sun Dec 04, 2016 9:11 pm, edited 1 time in total.
-
- Posts: 2719
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: ‽ Robotics
Team Stealth Productions: Vaporbots Division
If Russian roulette had a few less teeth and didnt have the counter rotating spinners it'd be a competitive design
Valravn still sexy af tho
Valravn still sexy af tho
‽ ROBOTICS
CHAMPIONS: Lightweight//Ruination 4//Nick's Fuzzy Rules -- -- Hobbyweight//Bot-o-Rama//Buzzkill -- -- Arbitraryweight//D12//Listen Here, Grandad, This Is America, Everyone Here Eats Ass
Bots that I think are better than my actual champions: Chimera // Venice Queen // Cuddle Time!
V900? Wheres V1-899 ~NickyDustyOwl
fridge ~ V900
Wasn't Ted Bundy physically attractive though? ~Superbomb122
get a room ~Madbull
I will NOT ~Superbomb122
CHAMPIONS: Lightweight//Ruination 4//Nick's Fuzzy Rules -- -- Hobbyweight//Bot-o-Rama//Buzzkill -- -- Arbitraryweight//D12//Listen Here, Grandad, This Is America, Everyone Here Eats Ass
Bots that I think are better than my actual champions: Chimera // Venice Queen // Cuddle Time!
V900? Wheres V1-899 ~NickyDustyOwl
fridge ~ V900
Wasn't Ted Bundy physically attractive though? ~Superbomb122
get a room ~Madbull
I will NOT ~Superbomb122
Team Stealth Productions: Vaporbots Division
Death Metal is yours to keep so if you want to put it here that's fine with me.
Team Ignition
Redline: Robot Bastards 1 LW champ
Pyrite: FRR Backlash LW champ
The Debilitator: Cherry Bomb Classic 1 LW champ
Sling Shot: Bot O' Rama 2016 Sportsman champ
Doomerang: Robot Fight Night HW champ
Redline: Robot Bastards 1 LW champ
Pyrite: FRR Backlash LW champ
The Debilitator: Cherry Bomb Classic 1 LW champ
Sling Shot: Bot O' Rama 2016 Sportsman champ
Doomerang: Robot Fight Night HW champ
-
- Posts: 296
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Parts Unknown
- Team: Team Stealth Productions
- Contact:
Team Stealth Productions: Vaporbots Division
Well, what's this? A new robotic creation?
Say it aint so, Shaba :)
Hehe, I'm not ready to fully reveal this one just yet. You see, I take project security pretty seriously and this one is still 'classified'. :P
Seriously, this will likely be my SHW entry for R4.
Say it aint so, Shaba :)
Hehe, I'm not ready to fully reveal this one just yet. You see, I take project security pretty seriously and this one is still 'classified'. :P
Seriously, this will likely be my SHW entry for R4.
-
- Posts: 1308
- Joined: Thu May 26, 2016 12:00 am
- Location: Canada, for now
- Team: The Monsterworks
Team Stealth Productions: Vaporbots Division
Looking forward to it.
Mastodon... Extinction (HW)
Osiris... Armageddon! (MW)
Elrathia... ROBOTS (LW)
Magnolia Pico... Ruination 4 (MW)
RipTide... ROBOT2 (FW)
Black Diamond... Cherry Bomb Classic 3 (HW)
MADSCIENCE... ROBOTS 3 (LW)
Abyss... ROBOTS 3 (MW)
The Monsterworks: 214-57 (.790) ...Probably up to no good.
Osiris... Armageddon! (MW)
Elrathia... ROBOTS (LW)
Magnolia Pico... Ruination 4 (MW)
RipTide... ROBOT2 (FW)
Black Diamond... Cherry Bomb Classic 3 (HW)
MADSCIENCE... ROBOTS 3 (LW)
Abyss... ROBOTS 3 (MW)
The Monsterworks: 214-57 (.790) ...Probably up to no good.
Cherry Bomb Classic IV: 25-4
Finishing Move: 6-2
Magnolia Pico: 6-1
Magnolia Grande: 6-1
Glacier III: 7-0
Magnolia Pico: 6-1
Magnolia Grande: 6-1
Glacier III: 7-0
ROBOTS 3: 21-6
Sixpounder: 3-4
MADSCIENCE: 9-1 Champion!
Abyss: 9-1 Champion!
MADSCIENCE: 9-1 Champion!
Abyss: 9-1 Champion!
-
- Posts: 296
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Parts Unknown
- Team: Team Stealth Productions
- Contact:
Team Stealth Productions: Vaporbots Division
And, so it turns out that the 'secret design' will be a HW entry for the Reddit Fixation: Monkeywrench tournament.
Also, I suck at keeping secrets and I'm an impatient biatch :P
-2WD (wheels are located toward the rear)
-Rear-hinged flipper
-hinged titanium skirts on all sides
-Skirts are a similar color to the arena floor and where skirt edge meets frame/flipper is 'blended' in. During the heat of a battle, the opposing robot's driver could have difficulty determining exactly where floor meets skirt meets flipper.
-Can self-right
STATS:
-Speed: 7
-Traction: 5
-Armor: 11
-Torque: 2
-Weapon: 5
Also, I suck at keeping secrets and I'm an impatient biatch :P
-2WD (wheels are located toward the rear)
-Rear-hinged flipper
-hinged titanium skirts on all sides
-Skirts are a similar color to the arena floor and where skirt edge meets frame/flipper is 'blended' in. During the heat of a battle, the opposing robot's driver could have difficulty determining exactly where floor meets skirt meets flipper.
-Can self-right
STATS:
-Speed: 7
-Traction: 5
-Armor: 11
-Torque: 2
-Weapon: 5
-
- Posts: 296
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Parts Unknown
- Team: Team Stealth Productions
- Contact:
Team Stealth Productions: Vaporbots Division
Coming up with some new renders for my CBC2 entries. This one is The Thieving Magpie, a Lightweight pneumatic flipper.
Album
Album
-
- Posts: 296
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Parts Unknown
- Team: Team Stealth Productions
- Contact:
Team Stealth Productions: Vaporbots Division
My Hobbyweight for CBC2-I came up with the idea from Witch Doctor/Shamen, but using cambered 2WD and a similar color scheme. Unfortunately, trying to render an asymmetrical drum in Sketchup is a PITA, and this being a 12-pounder, I chose to keep this as a static rammer. Maybe I'll add a flamethrower and have it shoot green flame, like S2 Shaman. :D
And, I still need to come up with a name...
Album
And, I still need to come up with a name...
Album
Last edited by Shaba117 on Thu Aug 10, 2017 1:44 pm, edited 1 time in total.
-
- Posts: 6142
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: The Last Train To Clarksville
- Team: Ice Cubed Robotics
Team Stealth Productions: Vaporbots Division
If it's gonna shoot flames from between a load of pointy teeth, then Ddraig Borffor (Purple Dragon in Welsh) could be an idea.
ICE³ ROBOTICS
"Tougher than a glacier, more might than an avalanche, more fury than a blizzard, and more burning passion than a volcano."
"Tougher than a glacier, more might than an avalanche, more fury than a blizzard, and more burning passion than a volcano."
-
- Posts: 296
- Joined: Wed Dec 31, 1969 7:00 pm
- Location: Parts Unknown
- Team: Team Stealth Productions
- Contact:
Team Stealth Productions: Vaporbots Division
Crankin' out the CADs-this one is a SHW flipper with dual flamethrower and likely entry for CBC2, Triple 6!
Album
Album
-
- Posts: 596
- Joined: Wed Dec 31, 1969 7:00 pm
- Team: Aquatic Robotics
- Contact:
Team Stealth Productions: Vaporbots Division
You could always go with The Two-Wheeled, Eighteen-Toothed Driving Purple Robot Eater.