North-West Sheds

Get your creative juices flowing and submit your own media, art, ariticles, or whatever you think people will find at least mildly entertaining to this site. We promote intelligence.
Post Reply
Mole55
Posts: 340
Joined: Wed Dec 31, 1969 7:00 pm

North-West Sheds

Post by Mole55 » Thu Feb 16, 2017 1:50 pm

I have no clue what I'm doing.

So, this is supposed to be every bot I've made. Yeah.

Dock Leaf v1.1:
Image

Never again. Never, ever again.

Gailieo's Voyager:
Image
Image

This was even worse. Oh god, what was I THINKING?! RA3 IS NEVER TO BE MENTIONED AGAIN.

Sleipnir:
Image

Oh good, something that doesn't make me want to punch past-me. Although my TinkerCAD skills were more than lacking. (They've slightly improved... I hope.)

Cerberus:
Image

So, I've no idea why this did so badly. Maybe it was badly statted, I don't know.

Why the name? Well, I originally wanted to do 3 configurations, but I had no clue how to do that. So here are the other 2.

Image
Image

Tyrian:
Image

ALL ABOARD THE MELTY TRAIN!!

I have no idea why this did so well. It's extremely unstable, and coins extremely easily. ALL HAIL FF'S.

TAT:
Image

SCIENTIFIC EXPARIMENT IS GUD

Antikythera:
Image

Antikythera was originally my Monkeywrench entry, when I pulled because of the spinner rules. Might enter it again, might not.

Starlight:
Image

I tried to do a flipper. Still hasn't competed.

Sunburn:
Image

Why didn't I just recolour Antikythera?

Micro Cuts:
Image

I need CBC rules for this to work. Going to have to wait for another tournament before I judge this.

Galileo's Voyager 2:
Image
Image
Image

Also haven't tested it. Definitely neater than the original.

Icarus:
Image

Fans are good at antweight level, as ALBOF had proven. Let's see how well they work at higher weight categories.

Sleipnir 1.1:
Image
Image
Image

That front looks better...

Also it has an anti-wedge configuration, and anti-hammer as well.

User avatar
The Monsterworks
Posts: 1088
Joined: Thu May 26, 2016 12:00 am
Location: Canada, for now

North-West Sheds

Post by The Monsterworks » Thu Feb 16, 2017 10:09 pm

You can definitely see the improvement over time as you look at these. If it's statted well, Sleipnir could have a strong run, and the new GV looks really solid without all of the weird angles and disjointed flipper.
Mastodon... Extinction (HW)
Osiris... Armageddon! (MW)
Elrathia... ROBOTS (LW)
Magnolia Pico... Ruination 4 (MW)
RipTide... ROBOT2 (FW)


The Monsterworks: 141 - 42 (.770) ...Probably up to no good.

Mole55
Posts: 340
Joined: Wed Dec 31, 1969 7:00 pm

North-West Sheds

Post by Mole55 » Thu Jun 01, 2017 5:27 pm

Just gonna put the stats here for storage, as I can't be bothered to screenshot.

TAT (Now with Added Sentience!):

4WD Carbide-esque bar spinner/Yeti-esque drumlette spinner and lifter/Witch Doctor fuck-off wedge and drumlette spinner

Horizontal:

Speed: 5
Traction: 3
Torque: 1
Weapon: 14
Armour: 7

Vertical:

Speed: 5
Traction: 3
Torque: 1
Weapon: 12 spinner, 2 lifter
Armour: 7

Anti-spinner:

Speed: 5
Traction: 3
Torque: 1
Weapon: 12
Armour: 9 (+2 front wedge)
Last edited by Mole55 on Thu Jun 01, 2017 5:40 pm, edited 1 time in total.

Mole55
Posts: 340
Joined: Wed Dec 31, 1969 7:00 pm

North-West Sheds

Post by Mole55 » Thu Jun 01, 2017 5:29 pm

Harrison Howell:

2WD Pulsar-esque drum spinner

Speed: 7
Traction: 5
Torque: 1
Weapon: 12
Armour: 5



Zeus:

4WD Loki-esque 4-bar flipper/Fuck-you wedge

Flipper:

Speed: 7
Traction: 5
Torque: 3
Weapon: 7
Armour: 8

Anti-Spinner:

Speed: 7
Traction: 5
Torque: 3
Weapon: N/A
Armour: 15 (+ 7 front wedge)


Nuka Rumex:

2WD Undercutting Control Spinner

Speed: 8
Traction: 6
Torque: 2
Weapon: 9
Armour: 7

Sleipnir:

8WD Brick, now with lifter with interchangeable spinner and grabber

Brick:

Speed: 9
Traction: 7
Torque: 3
Weapon: 0
Armour: 10 (+5 to the front wedge)

Spin'n'Lift:

Speed: 9
Traction: 7
Torque: 3
Weapon: 2 lifter, 8 spinner
Armour: 5

Grab'n'lift

Speed: 9
Traction: 7
Torque: 3
Weapon: 5 lifter, 5 grabber
Armour: 5
Last edited by Mole55 on Thu Jun 01, 2017 6:31 pm, edited 1 time in total.

User avatar
The Monsterworks
Posts: 1088
Joined: Thu May 26, 2016 12:00 am
Location: Canada, for now

North-West Sheds

Post by The Monsterworks » Sun Jun 04, 2017 10:45 am

Pics or it didn't happen. :P
Mastodon... Extinction (HW)
Osiris... Armageddon! (MW)
Elrathia... ROBOTS (LW)
Magnolia Pico... Ruination 4 (MW)
RipTide... ROBOT2 (FW)


The Monsterworks: 141 - 42 (.770) ...Probably up to no good.

Mole55
Posts: 340
Joined: Wed Dec 31, 1969 7:00 pm

North-West Sheds

Post by Mole55 » Fri Jun 30, 2017 6:13 pm

The Anarcho-Syndicate Technological Yeoman (T.A.S.T.Y) Mk1

Image

IT'S YUUUUUUUUUUUUUUUUUGGGGGEEEE!!!!!!!!!!!!!!!

Speed: 5
Traction: 3
Torque: 1
Weapon: 14 or 12
Armour: 7, 9 (+2 top) or 9 (+2 wheels)

Mole55
Posts: 340
Joined: Wed Dec 31, 1969 7:00 pm

North-West Sheds

Post by Mole55 » Fri Oct 27, 2017 2:23 pm

With Crash And Burn 6 being a thing, I've started making vapours. And gotten slightly addicted.

Image

Name: Kellur Bot Pls Dunt Clun
Weight: 95kg
Armour: 6.6mm mild steel monocoque
Drive: 2 Ampflow E30-150s geared 5:1
Power: 6S 13000mah LiPo for the drive, with 12S 2000mah LiPo for the weapon
Motivation: Some nice rubber wheels. 2WD
Top Speed: 13mph
Ground Clearance: 8mm at the back, resting on the floor at the front
Turning Circle: Zero turning circle! So great!
Dimensions: 42cm x 77cm x 61cm (with the bar vertical)
Weaponry: AN ALMIGHTY 5KW TURNIGY C580L BRUSHLESS INRUNNER POWERING A LETHAL 9KG BAR TO AN ENTIRELY THEORETICAL 150 MPH IN A WHOPPING 9 SECONDS! FEEL THE FURY OF 6KJ OF POWAH! (spin-up graph here)
Srimech: What's that?
Strengths: It's isa kellur bot pls dunt clun
Weaknesses: It is inwincible


Image
Image

Name: Oopsy-Daisy!
Weight: 100kg
Armour: Main chassis is made of a solid billet of aluminium, with 39mm sides. In the normal config, there is a 30mm HDPE plate to absorb shock on the top. In the brick config, the top is 3mm Aluminium, however the front is 13mm Hardox 450 and hinged. Good luck with that.
Drive: 4 Ampflow A28-400s geared 4.3:1
Power: 4 7S LiPo (25.9v) batteries with a capacity of 5000mah, adding to a total of 20aH.
Motivation: 6 inch rubber wheels. 4WD
Top Speed: 22mph
Ground Clearance: 18mm all round, 5mm at the top in the normal config, 22mm in the brick config.
Turning Circle: Lol.
Dimensions: 52cm x 88cm x 15.25cm (not including the wedge)
Weaponry: The 5cm wide hinged hardox wedge. Also the drive, which is capable of getting this thing to hit with a kinetic energy of 5kJ.
Srimech: It's invertible
Strengths: Lots of push, and very well armoured against spinners.
Weaknesses: No active weapon to do anything with.


Image

Name: Cadaverific
Weight: 100kg
Armour: All Hardox 450, but varying at different places. The bulkheads are 3cm wide, which are also the sides. The front is 2cm thick Hardox, so spinners can fuck off. The top is made of 5mm thick, so less thick.
Drive: 2 Alien C8085 200kv outrunners at 15S LiPo (55.5v), with BRUSHLESS RAGE #BrushlessHipsters
Power: There are 5 LiPo batteries in total. 2 8000 mAh batteries (One 10S and one 8S, so 18S (66.6v) in total) for the weapon, and another 3 8000 mAh batteries (All 5S, adding up to 15S (55.5v) in total)
Motivation: 10 cm wheels with HDPE hubs
Top Speed: 15mph (it accelerates quickly, very Pulsar-esque)
Ground Clearance: 2mm at the back, and angling down from there
Turning Circle: It's 2017, and I am deleting my turning circle
Dimensions: 44cm x 106cm x 27cm (including the bar)
Weaponry: An AR450 12kg eggbeater spinning at over <del>9000</del> 8000rpm. Rah. It spins up to this speed in 6.5 seconds, and with 25kJ of energy. So no real recoil. It's powered by an Alien TP100 brushless inrunner with an 18S LiPo behind it.
Srimech: Big weapon. Arena floor must die.
Notes: There are magnets that activate whenever the robot would gyro. So no gyro.
Strengths: Lots of armour, lot of pushing power. The DBZA fandom.
Weaknesses: Brushless motors. BRUSHLESS MOTORS. Golden haired monkeys.

Image

Name: Smaug
Weight: 100kg
Armour: The bulkheads are 40mm 2024 Aluminium, with the back and base being made of 4mm Hardox, the top being made of 20mm HDPE, and the wedge being 10mm Hardox
Drive: 48.1v LEM-130s. 1 per side
Power: There are 3 LiPo batteries in total. 2 12000 mAh batteries (One 6S and one 7S, so 13S (48.1v) in total) for the drive, and another 3S 1000mah for the flame and linear actuator
Motivation: 16cm tyres
Top Speed: 20 mph
Ground Clearance: 5mm all-round, with hinged forks at the front
Turning Circle: It's 1997 and I'm baffled by this lack of turning circle
Dimensions: 69cm x 51cm x 35cm (without the wings), 84cm x 77cm x 35cm (including the wings) (including the head both times)
Weaponry: A clamping head powered by a 600lb linear actuator, and a butane flamethrower (that is what the holes in the wedge are for)
Srimech: The wings
Strengths: Lots of drive power. 11 hp in fact
Weaknesses: Not spinner proof, slow to self-right

Image

Name: Citizens Erased
Weight: 33kg each
Armour: The bulkheads are made of 30mm 7075 Aluminium, with the armour panels being 5mm Grade 5 Titanium.
Drive: 25.9v A28-150 "short" Magmotors. 1 per side
Power: A single 8000mAh 7S (25.9v) LiPo.
Motivation: 16cm rubber tyres on HDPE hubs.
Top Speed: 22mph. They're fast buggers.
Ground Clearance: 2mm at the back, and angling from there.
Turning Circle: TIME TUUURRNS
Dimensions: 40cm x 71cm x 16cm.
Weaponry: CO<sub>2</sub> powered flipper running at 750psi. It is capable of 45 flips per match, and flinging people 45cm into the air.
Srimech: Pretty obvious.
Strengths: They're a gang that's seen all they'll ever need, and they're fucking fast.
Weaknesses: Lack of armour, and lack of OoTA capability.
Last edited by Mole55 on Fri Oct 27, 2017 4:07 pm, edited 1 time in total.

User avatar
Sylandrophol
Posts: 397
Joined: Wed Dec 31, 1969 7:00 pm
Location: City 17

North-West Sheds

Post by Sylandrophol » Sat Oct 28, 2017 2:39 pm

aw man Citizens Erased even have the OoS colors
TEAM FOXTROT UNIFORM

Thunderstryke - New Blood Tournament Semi-Finals
Neophyte Redglare - Robot Fight Night: Season 1 Quarter-Finals
America Offline - Robot Fight Night: Season 1 Quarter-Finals

--

ROBOT2

Dreamchaser: 0-7
Neophyte Redglare: 4-3 (11-12 total)

--

"I'm curious what tactical advantage you're hoping to gain by sacrificing a portion of your bots size/weight for a deployable banana"

-NWOWWE 2017

"@That Kode Guy this man just threatened to enact biological warfare on your cartoon wife"

-V900 2018

Mole55
Posts: 340
Joined: Wed Dec 31, 1969 7:00 pm

North-West Sheds

Post by Mole55 » Sun Dec 24, 2017 4:03 pm

Tonight, in the Great Robit Giveaway of 2017, I won multiple robots. All weird of course.

Firstly:

<big>Antivenom</big>

Image

It's got a turret, and a flipper, and mecanum wheels

7 speed, 5 traction, 2 torque, 7 weapon (5/5), 9 armour (+1 flipper)



Secondly:

<big>Freedom</big>

Image

Gonna have to redo bits of this, because I think we decided that switching a motor between drive and weapon is bullshit, so no stats yet.



Thirdly:

<big>Osiris</big>

Image

Mmm, I love a bit of MegatRON in the morning.

8 speed / 6 traction / 2 torque / 7 weapon (5 saw / 5 lifter) / 7 armour (+1 lifter)



Fourthly:

<big>Fathom</big>

Image

With a boot-up to HW, yee-haw Gentleman's Club here we come&#33;

8 speed / 7 traction / 1 torque / 11 weapon / 3 armour



Fifthly:

<big>Witness Me</big>

Image

And into the "when Sleipnir is nerfed" box it goes&#33;

8 speed / 8 traction / 3 torque / 3 weapon (+1 clutch) / 8 armour (+1 flipper)



And finally:

<big>RipTide</big>

Image

Because Black Dog clones are great

6 Speed / 6 Traction / 1 Torque / 10 Weapon / 7 Armour (+1 drum)

Post Reply